Skip to main content

Course Search

Course Search

Course Search

Manufacturing Technology (Bachelor of Engineering, L7, 60 ECTS)

  • Status: Register Your Interest

  • Campus: Blended

  • years: 2.5

  • Fees: €6,925


Course Overview

The aim of this programme is to provide a progression route in the area of Manufacturing Technology, for qualified advanced craft-persons and national/higher certificate holders with qualifications at, or equivalent, to level 6 on the NQAI framework. The Bachelor of Engineering in Manufacturing Technology seeks to provide a programme that is learner-centred in terms of flexibility of quantity, duration, timing and pace of study.

PLEASE NOTE THIS DEGREE IS NOT ACCREDITED BY ENGINEERS IRELAND.




Contact Details

General Queries

Flexible Learning Office

Email: flexible.midwest@tus.ie

Telephone: (061) 293802

Academic Queries

Michael O’Flanagan

Email: Michael.OFlanagan@tus.ie

What are the entry requirements?

A candidate should have relevant experience in a technical role in the electrical services or industrial sector.  A candidate must also meet the following minimum entry requirements.

1.   Level 6 Advanced Certificate in Craft in Manufacturing  (or equivalent trade)

or

2.   National or Higher Certificate in Engineering or Technology with specialisation in Electrical, Electronic, Electromechanical or Industrial Engineering, or equivalent, at Pass level. (HETAC/FETAC Level 6 Qualification).

or

3.   Prior experiential learning and/or experience deemed to meet the criteria for an award at level 6 as set out in the NQAI Framework.

or

Recognised Prior Learning (RPL) – Assessment
Please review the academic entry requirements for this programme.
If you do not hold these qualifications but would like your application to be assessed under RPL please select YES on the online application form. Once you have submitted your online application you will then receive an email acknowledgement with further instructions on RPL.

ENGLISH LANGUAGE: Applicants who do not have English as their first language must ensure they satisfy English Language requirements. For entry to undergraduate courses, a score of 5.5 in an IELTS or equivalent exam is required. For postgraduate courses, a score of 6.0 in an IELTS or equivalent exam is required. It is the responsibility of the applicant to ensure their English proficiency meets these requirements.

Course Content

  • Mathematics 1* (Mandatory)

    Credits : 5

    The aim of this module is to provide the learner with a broad knowledge of the application of engineering maths and applied statistics.

  • Project Management* (Mandatory)

    Credits: 5

    To provide the learner with a broad knowledge of the techniques, software tools and approaches used in project management in industry.

  • Industrial Project* (Mandatory)

    Credits: 10

    To provide the learner with the opportunity to develop their independent leadership and project management skills through the study, analysis and resolution of a work-based

  • Manufacturing and Operations Engineering* (Mandatory)

    Credits: 5

    To provide the learner with a broad knowledge of modern Operations and Manufacturing engineering/management as it applies to a variety of businesses and organisations by providing a logical path through the activities of Operations Engineering and its strategic context.

  • Advanced PLC Systems (Elective)

    Credits: 5

    To provide the learner with a specialised knowledge of advanced automation systems, structured programming approaches and distributed control applications

  • Electrical Machines (Elective)

    Credits: 5

    The aim of the module is to provide the learner with specialist knowledge of the types, sizing, characteristics and applications of single and three-phase AC and DC motor in manufacturing facilities.

  • Energy Efficiency in Industry (Elective)

    Credits: 5

    The aim of the module is to provide the learner with specialist knowledge of and analysis methods for energy usage in industry with a focus on energy efficiency and carbon emission reduction.

  • Programmable Logic Controller Systems (Elective)

    Credits: 5

    The module aims to provide the learner with a broad knowledge of automation systems, programming approaches and industrial control applications.

  • Distributed Electrical Systems (Elective)

    Credits: 5

    The aim of the module is to provide the learner with specialised knowledge of the efficiency and electrical integration of electrical equipment and plant in a manufacturing facility.

  • Embedded Systems (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of embedded computer system including processors, hardware systems, operating system, single board computer, development environments and programming.

  • Computer Networks (Elective)

    Credits: 5

    The aim of this module is to introduce the learner to Computer networks including infrastructure, operating systems, network management, data protection and internet technology

  • Computer Systems (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of computer system including cloud and mobile computeing, components, storage and memory systems, operating systems and diagnostics.

  • HMI and SCADA (Elective)

    Credits: 5

    This subject aims to give the learner the skills needed to successfully design, develop and integrate a SCADA solution in industry.

  • Management Accounting and Methods (Elective)

    Credits: 5

    The aim of this module is to provide the learner with a broad knowledge of costs applied to the value chain in industry and management techniques to control them.

  • Quality Methods (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of modern quality management methods, standards and techniques used in manufacturing

  • Website Programming and Development (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of Internet and web technologies. Emphasis is placed on how to establish an online presence by learning the tools to plan, construct and manage web based applications. Learners will adopt best practice in terms of search engine optimisation and responsive web design.

  • Database Development (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of the application, construction, programming and management of database systems.

  • Industrial Logistics (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of supply chain structures, methods, management and product tracking

  • Computer Aided Manufacturing (Elective)

    Credits: 5

    To provide the learner with a specialised knowledge of integrated computer aided prototyping and manufacturing of products

  • Computer Aided Design (Elective)

    Credits: 5

    Computer Aided Design is an essential communication and design technique for those involved in engineering. The aim of this module is to give the student a comprehensive introduction to the standards used in the preparation of Engineering drawings. Computer Aided Design (CAD) systems are now the typical means by which Engineering drawings and associated 3D models are produced, students will use 3D CAD software to prepare a portfolio of their work.

  • Electronics Testing Methods (Elective)

    Credits: 5

    To provide the learner with a specialised knowledge of testing, debugging and faultfinding electronic printed circuit boards and systems

  • Electronics Manufacturing (Elective)

    Credits: 5

    To provide the learner with a broad knowledge of the design, development and fabrication of electronic products, printed circuit boards and systems

  • Electrical Power Systems (Elective)

    Credits: 5

    To provide the learner with specialised knowledge of the types, characteristics and applications of power supply and storage systems

  • Electrical and Instrumentation CAD (Elective)

    Credits: 5

    The aim of this module is to Design and Create Electrical, Instrumentation and Control drawings.

  • Instrumentation and Calibration (Elective)

    Credits: 5

    The aim of this module is to provide learners with the knowledge of industrial process instrumentation, calibration and control which includes the concepts, engineering and installation of control and measurement equipment.

  • Industrial Maintenance Systems (Elective)

    Credits: 5

    This module aims to provide the learner with a broad knowledge of modern maintenance strategies, management approaches and control systems

  • Polymer Processing Technology (Elective)

    Credits: 5

    The Polymer Processing Module focuses on the materials, processes and tooling used in relation to polymers, particularily the common polymer processes of injection moulding and extrusion and the characteristics of various polymers. There is also a practical aspect with particular emphasis on the design and manufacture of tooling for these processes.

     

  • Solar Energy Systems (Elective)

    Credits: 5

    The aim of this module is to give learners a detailed understanding of the operation and application of PhotoVoltaic and Solar Thermal Systems

  • Intelligent Vision Systems for Industry (Elective)

    Credits: 5

    To provide a knowledge of computer vision including fundamentals of image formation, camera imaging geometry, feature detection and matching, multiview geometry including stereo, motion estimation and tracking, and classification.

  • Renewable Energy Technology 2 – Wind Energy (Elective)

    Credits: 5

    To give the learner a thorough introduction to the conversion of wind energy into electrical energy

More Information

  • The proposed delivery schedule is subject to change.

    Successful applicants must complete 11 modules, including a work-based project in order to complete the required 60 credits. Each module is 12 weeks in duration, one evening per week. A range of modules are offered in Semester 1 (September to December) and in Semester 2 (January to May) each academic year. Modules are a mix of online, blended and classroom based. All classroom-based elements will take place onsite at the Moylish campus in Limerick. Degree registered students will be contacted twice yearly with the selection of modules available for the coming Semester.

    On average students complete 2 modules per Semester.

  • Each 5 credits will normally equate to approximately 100 Total Learning Hours. Total Learning Hours includes the time you spend in class (lectures, tutorials, practical elements) and the time you spend completing work outside of college.  The balance between these two varies by discipline, and by level of study. You should bear in mind that the workload will increase at particular times e.g. when assignments are due.

  • Modules are assessed using a mixture of continuous assessment and examinations. It is important to note that final module exams normally take place mid-week and during normal working hours.

  • Bachelor of Engineering in Manufacturing Technology (Level 7, 60 ECTS)

  • The total fee for this programme is €6,925.

    5 credit modules – €625
    10 credit Project – €675

     

     

  • Application Process for 2025/2026 will be opened Approximately February 2025

    Please click Register Your Interest to be informed when applications open